Return to site

  

Simple and Easy Troubleshooting Tips for Canon MG2922 Printer 

  

Canon MG2922 printer is known for its best quality and efficiency. But sometimes it displays some error messages like the Canon MG2922 printer is not responding, offline printer or the Canon printer is not printing. Canon MG2922 Printer Troubleshooting mechanism depends on the issues of the printer. In some cases, you can resolve the problems by hard resetting or updating the printer drivers. Still, if you cannot resolve the issue, follow the below-mentioned troubleshooting tips to fix the issues related to the Canon MG2922 printer. Let’s get started.

broken image

Follow the below-mentioned troubleshooting methods to fix the various issues related to the Canon MG2922 printer:

Fix 1: Canon MG2922 printer is not responding

Due to the lack of communication between the printer and the computer, the Canon MG2922 printer stops responding. To fix this issue, follow the below-mentioned troubleshooting tips:

  • First of all, press the “setup” button on your Canon MG2922 printer. 
  • Move to the “WLAN setup” tab and tap on the ok button.
  • Next, select the access point, enter the network key and hit the ok button.
  • Now, use the setup file to install the Canon printer drivers.
  • Then, search your Canon MG2922 printer, tap on the yes button, and press the next button to proceed further.
  • After completing the installation of the Canon MG2922 printer, try to print a test document.

Fix 2: Resolve the Canon MG2922 paper jam issue

By following the below-mentioned steps, you can quickly fix the Canon MG2922 printer paper jam issue:

  • First, turn off the Canon MG2922 printer and retract the paper output tray.
  • Now, open the cover and check if the paper is jammed under the “Fine” cartridge. 
  • Hold the cartridges with both hands and remove the paper slowly.
  • After removing all the jammed paper from the printer, close the cover.

Fix 3: Steps to resolve the Canon MG2922 printer is not printing

Check out the following steps to fix the Canon MG2922 printer is not printing issue:

  • If your Canon MG2922 printer is not printing, then you need to perform the hard reset of the printer.
  • Turn off your Canon MG2922 printer and remove the power cord.
  • Wait for a few minutes, and then reconnect your Canon MG2922 printer directly to the power socket.
  • Now, turn on your printer and try to print a test document to check if the Canon MG2922 printer is printing or not.

Fix 4: Resolve the Canon MG2922 printer is offline issue

If your Canon MG2922 printer goes offline, then follow the below-mentioned steps to fix the issue:

  • First of all, restart your Canon printer spooler service and disable the “use printer offline” feature.
  • Then, reinstall the Canon MG2922 printer software.

Fix 5: The Canon MG2922 paper won’t feed

To resolve the Canon MG2922 paper won’t feed issues, make sure that you are placing the paper with the print side facing up. You need to align the paper stack against the right-hand side of the try.

Hopefully, the above-mentioned Canon MG2922 Printer Troubleshooting tips will help you to resolve the most common issues related to the Canon MG2922 printer.